Digital Clamp Meter
KAIWEETS HT206D Digital Clamp Meter True RMS 6000 Counts,
KAIWEETS HT206D Digital Clamp Meter True RMS 6000 Counts
True-RMS clamp meter
This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity, and Temperature tests. True RMS for accurate measurements on non-linear loads.
LowZ & LPF
Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformers. To measure the current, you need to clamp the meter around one of the wires and not the whole power cord.
NCV Detection Function
Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
Multi-function
Two-color backlit LCD Display – When the voltage is> 80V, the current is > 3A, the LCD backlit screen turns red to warn you of high voltage.
Z/F Button Measurement
Press the “Z/F” button to switch the respective secondary function between the different measurements, such as between AC and DC.
If current> 3A, the orange display lights up.
The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).
In the real scene
To measure the current, you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from the two wires canceling each other; therefore, the meter reads 0 A.
Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp; otherwise additional errors will occur.
Automatic Shutdown
If there is no operation in 15 minutes, the meter will beep 3 times, indicating for Auto Power Off; with, with no further operation in 30 seconds, the meter beeps again and automatically shuts down.
Temperature Measurement
Range: -4°F~1832°F
The K-type thermocouple included.
Reviews
There are no reviews yet.